5 Troubleshooting Tips For Home Oxygen

5 Troubleshooting Tips For Home Oxygen

5 Troubleshooting Tips For Home Oxygen
5 Troubleshooting Tips For Home Oxygen
5 troubleshooting tips commonly found while using home oxygen.

If you’re having trouble with your home oxygen, there are a few things you can check before calling the manufacturer or your supplier.

Is the unit plugged in?  Make sure that the outlet you’re using is working properly by testing it with a light or other device. If it’s not working, try a different outlet.

Is the power cord connected properly? Check that it is not loose or disconnected from either end.

Make sure there’s about 2 feet on all sides of your unit and the external filters are clean to allow for proper air flow and to avoid the unit from overheating. If your concentrator won’t turn on or if it takes longer than usual to turn on, make sure there’s enough room around your unit so that air can freely flow through it.

Check your tubing for cracks or holes by gently tugging on different sections of tubing to ensure that there isn’t any kinking or crimping in places where it shouldn’t be crimped or kinked.

Excess moisture in the hose, especially in the cannula just simply means there’s plenty of moisture in the air. You can remove the bottle and secure the hose straight to the unit. Make sure to change hoses and cannulas if there is water buildup in the lines.

Call your oxygen supplier if you have any more questions or problems.

Share this Post:

Leave a Reply

Your email address will not be published. Required fields are marked *

We Have Temporarily Relocated!

Our main facility experienced an emergency fire, but we are continuing to provide uninterrupted care from our temporary location

Services and Phone Numbers remain unchanged.
Thank you for your patience!